Month: January 2020

VMware VCP 6.7-DCV – Objective 1.4 – Differentiate between NIOC and SIOC

by Samuel Mitchell, posted in VMware

The following notes will assist you to prepare for this objective:

  • This objective is about managing noisy neighbors!
    • NIOC for network & SIOC for storage
  • You need to demonstrate understanding of
    • What dimensions you can control and applied-to
    • Limitations of service
    • Pre-reqs for implementation
  • Foundation knowledge of proportional share allocation is expected
    • What does low, medium & high mean?
    • What happens when you use numbers instead of labels?
    • How does the power on of another VM affect share allocation?

Reference:

vSphere Resource Management Guide pdf – Chapter 9-Managing Storage I/o Resources

vSphere Networking Guide pdf – Chapter 11 – vSphere Network I/O Control

VMware VCP 6.7-DCV – Objective 1.3 – Describe storage types for vSphere

by Samuel Mitchell, posted in VMware

The following notes will assist you to prepare for this objective:

  • Ensure you are clear on the differences between
    • Block (LUN/vVOL)
    • File access
    • vSAN
  • Read storage questions slowly and carefully
    • Are you being asked about VMs and their virtual hard disks?
    • Are you being asked about what storage vSphere can address?
  • VMware loves acronyms
    • For this objective, you need to learn lots of them
  • For example
    • Can you differentiate SIOC from VAIO?
    • Do you know if RDM is possible with NFS?
    • Happy with VASA providers?

Reference: vSphere 6.7 Storage Guide

VMware VCP 6.7-DCV – Objective 1.2 – Identify vCenter high availability (HA) requirements

by Samuel Mitchell, posted in VMware

The following notes will assist you to prepare for this objective:

  • Be very clear that this is vCenter availability management NOT host
  • Learn the topology of a vCenter HA deployment
    • Nodes
    • Roles of nodes
    • What can and can’t they do? Particularly witness
  • Set up vCenter HA in your lab, so much more interesting study than just reading
    • Easy to enable/disable
  • Make sure you read the vCenter HA section of the vSphere Availability Guide

Reference: vSphere 6.7 Availability Guide pdf – Chapter 4 – vCenter High Availability

VMware VCP 6.7-DCV – Objective 1.1 – Identify the pre-requisites and components for vSphere Implementation

by Samuel Mitchell, posted in VMware

The following notes will assist you to prepare for this objective:

  • Know your vSphere technologies and what they do and what they don’t
    • HA
    • DRS
    • FT
    • vCenter HA
    • vSAN
  • Don’t let questions mislead you on risks mitigated
    • For example does DRS maintain availability?
  • Learn the vSphere 6.7 resource pre-reqs
    • Minimum CPU & RAM
    • Why do you need the HCL?
  • Think about post-install procedures
    • Logging, scratch, dump collection
    • Authentication
  • Know your way around VAMI
    • Adding syslog, adding NTP, DNS settings

Reference: vSphere ESXi 672 Installation Setup Guide.pdf – Chapter 5

vCenter Server Installation and Setup pdf = Chapter 2

CCNP Route 300-101 – IPv6 Knowledge

by Samuel Mitchell, posted in Cisco, Routing & Switching, windows, Windows server

This article is to share the knowledge about IPv6 (Internet Protocol version 6) in a simple way.

The first important knowledge you will needed to know before understanding IPv6 is that it is a 128-bit address that is represented using Hexadecimal values and it will be beneficial to know the binary and decimal equivalent.

Please see below the table showing this information:

Hex Binary Decimal
0 0000 0
1 0001 1
2 0010 2
3 0011 3
4 0100 4
5 0101 5
6 0110 6
7 0111 7
8 1000 8
9 1001 9
A 1010 10
B 1011 11
C 1100 12
D 1101 13
E 1110 14
F 1111 15

The next aspect of IPv6 Addressing to understand is that it is similar to IPv4 address where the address is split up into Octet (10.10.10.1) separated by a dot (.), IPv6 address are split up into quartet (2000:ABCD:0000:0000:0000:0000:0000:0001) separated by a colon (:). Each quartet is made up of 4 Hexadecimal number.

An example of an IPv6 address is below along with the binary of the address:

Quartet Hexadecimal Binary
1st 2000 0010 0000 0000 0000
2nd ABCD 1010 1011 1100 1101
3rd 0000 0000 0000 0000 0000
4th 0000 0000 0000 0000 0000
5th 0000 0000 0000 0000 0000
6th 0000 0000 0000 0000 0000
7th 0000 0000 0000 0000 0000
8th 0001 0000 0000 0000 0001

Shortening the IPv6 Address

there are two methods we can use to shorten the IPv6 address to make it easier to write which is also applied by supported devices.

  1. Eliminating the leading zeros
  2. Using the double colon (::) to represents multiple quartet of zeros. this can only be applied once in an IPv6 address.

let me use an example IPv6 address 2000:ABC0:00ED:0000:0000:1234:0000:0001

Applying shortening rule 1 to eliminating the leading zeros which will be:

2000 : ABC0 : 00ED : 0000 : 0000 : 1234 : 0000 : 0001
2000 : ABC0 : ED : 0 : 0 : 1234 : 0 : 1

Then we are going to apply rule 2 which is to use the double colon (::) to replace multiple quartet of zeros:

2000 : ABC0 : 0 : 0 : 1234 : 0 : 1
2000 : ABC0 :: 1234 : 0 : 1

IPv6 Prefix

The IPv6 address has two main parts to the address:

  1. Prefix (Network ID)
  2. Interface ID (Host ID)

The IPv6 Prefix is denoted by the CIDR /XX. For example 2000::/3 where /3 tells you the network portion of the IPv6 address space.

There are also subdivision of the Prefix:

  1. Registry Prefix – assigned by IANA to an RIR
  2. ISP Prefix – assigned by an RIR to an ISP
  3. Site Prefix (Global Routing Prefix) – assigned by an ISP to customer
  4. Subnet Prefix – assigned by a customer engineer internally

RIR – Regional Internet Registry

IANA – Internet Assigned Numbers Authority

IPv6 Address Types

The unspecified address is an address used by an IPv6 node that has not gotten an IPv6 address.

The Global address is the address space reserved to be routed on the internet which is assigned by the IANA.

The Multicast address is joined by IPv6 nodes depending on the class the device is apart of which will be discussed later.

The Link-local is the address automatically assigned by the IPv6 node using the EUI-64 method once the IPv6 is enabled on an interface.

Types of Address Binary Reality IPv6 method
Unspecified 0000…0 ::/128
Loopback 0000…1 ::1/128
Global 001… (first 3) 2000::/3 (2000 – 3FFF)
Multicast 1111 1111 (first 8) FF00::/8
Link-local 1111 1110 10… (first 10) FE80::/10

There is another special type of address which is the Extended Unique Identifier (EUI-64) that uses the MAC address (48-bit) as part of the IPv6 Address. The challenge with the MAC address is that it is short 16-bit so to make it 64-bit, FFFE will be place in the middle of the MAC address. Another modification that is required to derive the EUI-64 address is that the 7th bit must be flipped. To better understand this address, let me list the rules in a table:

Steps Rule Address
1 Get the Mac Address AAAA.BBBB.CCCC
2 Insert FFFE in the middle of the MAC AAAABB FFFE BBCCCC
3 Flip the 7th bit by converting the first 2 Hex to binary, flipping the 7th bit and then converting it back to Hexidecimal AA = 1010 1010

1010 1000 = A8

A8AA:BB FF:FE BB:CCCC
4 Apply the network prefix. in the example using link-local FE80::/8 FE80:0000:0000:0000:A8AA:BBFF:FEBB:CCCC /64
5 Shorten the IPv6 Address FE80::A8AA:BBFF:FEBB:CCCC /64

Local Multicast Address

IPv6 Local Multicast Address Description
FF02::1 All-node
FF02::2 all-routers
FF02::5 all-OSPF routers
FF02::6 OSPF designated routers
FF02::9 All RIP
FF02::A All-EIGRP
FF02::1:FFxx:xxxx solicited-node where x is the last 6 Hex of the IPv6 unicast address

IPv6 Node Layer 2 Communication

When a IPv6 node needs to communicate at the Layer 2 after receiving a multicast packet, the IPv6 node uses the following Layer 2 (MAC) address format:

3333 : xxxx : xxx1

where X is the last 8 Hex of the MAC address but the 8th Hex is change to 1 as shown above.

For the solicited address after the 3333, we will insert FF and then add the last 6 Hex as shown below:

3333 : FFxx : xxxx

IPv6 Address Dynamic Assignment

Stateless Address Auto Configuration (SLAAC)

  • The IPv6 address is derived using the Network prefix and adding the MAC address to it (EUI-64)
  • It used the Stateless DHCP
  • The prefix must be /64
  • There should be no DHCP IP pool configured on router

Stateful DHCP

  • The IPv6 address is dynamically assigned to the host by the DHCP server along with DNS and gateway.

Domain Name System (DNS) – RF6106

IPv6 Neighbor Discovery Protocol (NDP)

Network Discovery Protocol is defined in the RF 4861.

NDP Message Types

  • Router Solicitation (ICMPv6 type 133)
    • Asking router for information
  • Router Advertisement (ICMPv6 type 134)
    • Router responding with information
  • Neighbor Solicitation (ICMPv6 type 135)
    • Asking the neighbor for information
  • Neighbor Advertisement (ICMPv6 type 136)
    • Neighbor responding with information
  • Redirect (ICMPv6 type 137)
    • redirect of a packet

Function of NDP

  • Duplicate Address Detection (DAD)
  • Router Discovery
  • Address Configuration
  • L2 (link-level) Resolution
  • Redirection of a Packet